Yes, We're Open! All Orders Ship FREE with No Minimum!

How to Eliminate Oxidation, Scratches, and Staining on Your Boat or RV

As soon as you purchase your boat or RV, you’re going to want to use it. Wear and tear is inevitable and over time it will become more of an eyesore. How do you remove oxidation, scratches, and staining from your boat or RV? With McKee’s 37 Heavy Cut Oxidation Remover! McKee’s 37 Heavy Cut Oxidation Remover is the first step in correcting your gelcoat or fiberglass finish so that it can shine like new. Apply it with a machine polisher for best results. The diminishing abrasives remove gloss hindering oxidation while the lubricating oils ensure ample working time and easy wipe off.

Gelcoat can be a bear to work with! In the past, the only options for removing tough oxidation and stains were super heavy duty mega grit compounds that often left you with more damage than you started with. That’s not the case today! McKee’s 37 Heavy Cut Oxidation Remover uses the most advanced diminishing abrasives available coupled with nourishing polishing oils to provide better results than its predecessors could ever dream of.



Directions:
  1. Shake well. 
  2. Apply an X of polish directly onto heavy cutting foam or wool pad. 
  3. Spread polish over a 2’ x 2’ area with the machine turned OFF.  For a rotary polisher, set speed between 1200 and 1500 RPM.  For a dual action polisher, set speed between 5000 and 6000 OPM.
  4. Using a slow arm movement with heavy downward pressure, perform 4-5 section passes, or until the polish turns clear. 
  5. Buff to a high gloss using a clean, soft microfiber or terrycloth towel.
  6. Follow with McKee’s 37 Gloss Enhancing Final Polish to further refine the surface.


Heavy Cut Oxidation Remover